The reactor order was received in the fourth quarter of 2011 and was delivered in the second quarter of 2012. Huayan said that CRIUS® technology is cost-effective and can be seamlessly and quickly combined with the production process. The CRIUS® II-L reactor meets the high output requirements of its nitride chip materials.
The Substation Fitting is mainly used for the connection of the bus down-lead of substation and the outlet terminal of electrical equipment (such as transformer, circuit breaker, isolating switch and mutual inductor). Because the outlet terminal of electrical equipment commonly made by copper and aluminum, while the bus down-lead is divided into aluminium strand wire or steel core aluminum strand wire, the equipment, by material, was into the aluminum and copper two series. According to the installation method and structure of the different equipment, the line clamp was divided into bolt type and compression type. Each type of wire clip is divided into three, listing as 0, 45 and 90 degrees according to the angle of the down-lead and the installation of the terminals from the electrical equipment.
Substation Fitting
Grid Line Fitting,Power Fitting For Substation,Transmission Line Hardware,Substation Cable Fitting,High Voltage Connector ,Insulated Clamps ,Straight Line Clamp
Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com