Battery Disassembly and Installation of Electric Stacker

The battery of an electric stacker is equivalent to the heart of an electric stacker. He is the source of all power, so if there is a problem with the battery, the electric stacker cannot be used. Therefore, learning to disassemble and install the battery properly is a very necessary task for people using electric stackers.

VOLOX (Villeco) Xiao Bian collected some information on this topic on the Internet, here to share with you how to disassemble and install the electric stacker battery.

1. Lift and remove the electric stacker battery;

First of all, it must be ensured that the electric stacker is in a horizontal parking position. In order to avoid a short circuit, a rubber insulation mat must be used to cover the exposed electrodes or connectors on the battery. Pull out the battery plug or battery cable to ensure that the battery will not be held on the stacker. If you use the lifting tools when transporting the battery, you must ensure that the lifting tools have enough load, and the lifting tools must be pulled vertically to prevent the battery box from being damaged and deformed.

Pay attention to the direction of the hook hooked on the hanging hole of the battery to prevent the hook from falling on the surface of the battery when the lifting tool is released. Secure the lifting tool to the lifting hole and lift the battery. The new battery's parameters must be exactly the same as the original battery. Do not remove weight or change its position. Install the battery in the reverse order, paying attention to the battery's loading position and wiring.

2. The electric stacker battery is removed and placed sideways; as with the lifter, the electric stacker must first be placed in a horizontal parking position. To avoid a short circuit, the battery must be exposed with a rubber insulation mat. The electrodes or connectors cover. Pull out the battery plug or battery cable to ensure that the battery will not be held on the stacker. When removing the battery from the side, first take out the battery baffle and pull the battery out from the side; when you put the battery in the opposite way. After installing the new battery, you must check all cable connections and plug connections for obvious damage. The battery cover must be safely closed before starting up! Close the battery cover slowly and carefully. Do not touch the position between the battery cover and the frame.