WE ARE MANUFACTURER SINCE 2000
Experience: Our company was set up in 2000, having over 14 years of production experience in galvanized street light poles.
Production Capacity: We manufacture galvanized street light poles from 3M-35M at the capacity of 20,000 poles per month.
Production lines: For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.
SPECIFICATION
Material: High-quality steel Q235/SS400 from BAOSTEEL Group
Welding Technique:Automatic submerged arc welding
Surface Treatment:Hot dip galvanizing and powder painting
Welding Standard: GB11345 Grade II
Thickness of Zinc Coating :≥ 86um
Adhesive Force of Zinc Coating: GB2694-88
Anti-wind Capacity: 36.9m/s
Anti-corrosion Lifetime: ≥20 years
Coating Layer Thickness : ≥100um
Adhesive force :GB9286-880 Hardness ≥2H
Steel Pole Height Options:3.5m~15m
Street Lighting Poles Type Options: Conical, polygonal
Specifications
Â
Height |
From 18 m to 50m |
Suit for |
Airport ,seaport, plaza, stadium, square, highway station, street way ,etc |
Shape |
Round, Multi-pyramidal, Column form, polygonal or conical |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
Torrance of dimension |
+- 2% |
Lighting Source |
400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m² |
Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut |
Electric appliance control device |
Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles |
Insert mode, inner flange mode, face to face joint mode . |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
80 Km/Hour |
Welding |
We has past flaw testing. Internal and external double welding makes the welding in shape |
Thickness |
6 mm to 20 mm |
Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Delivery Time
Generally 20 working days for 100 galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. welding line--polishing line--spray painting line--packaging line flood light 15m, 18m, 20m, 25m, 30m, 35m stadium high mast light pole tower with lifting system
WE ARE MANUFACTURER SINCE 2000
Experience: Our company was set up in 2000, having over 14 years of production experience in galvanized street light poles.
Production Capacity: We manufacture galvanized street light poles from 3M-35M at the capacity of 20,000 poles per month.
Production lines: For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.
SPECIFICATION
Material: High-quality steel Q235/SS400 from BAOSTEEL Group
Welding Technique:Automatic submerged arc welding
Surface Treatment:Hot dip galvanizing and powder painting
Welding Standard: GB11345 Grade II
Thickness of Zinc Coating :≥ 86um
Adhesive Force of Zinc Coating: GB2694-88
Anti-wind Capacity: 36.9m/s
Anti-corrosion Lifetime: ≥20 years
Coating Layer Thickness : ≥100um
Adhesive force :GB9286-880 Hardness ≥2H
Steel Pole Height Options:3.5m~15m
Street Lighting Poles Type Options: Conical, polygonal
Specifications
Â
Height |
From 18 m to 50m |
Suit for |
Airport ,seaport, plaza, stadium, square, highway station, street way ,etc |
Shape |
Round, Multi-pyramidal, Column form, polygonal or conical |
Material |
Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 |
Torrance of dimension |
+- 2% |
Lighting Source |
400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m² |
Light plate |
Various figure of selection ,material with hot dip galvanization steel frame |
Lifting system |
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut |
Electric appliance control device |
Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Joint of Poles |
Insert mode, inner flange mode, face to face joint mode . |
Design of pole |
Against earthquake of 8 grade |
Wind Speed |
80 Km/Hour |
Welding |
We has past flaw testing. Internal and external double welding makes the welding in shape |
Thickness |
6 mm to 20 mm |
Production Process |
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging |
Packages |
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required |
Delivery Time
Generally 20 working days for 100 galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. welding line--polishing line--spray painting line--packaging line
FBT WDM - Fused Biconic Taper Wavelength Division Multiplex
A fusion taper type wavelength division multiplexer, comprising an input end cone, an output end cone, and a coupling area. The input end cone is located at one end of the coupling area, and the output end cone is located at the coupling area. At the other end of the zone, the input end cone includes an input arm and a backscatter arm, the output end cone includes a through arm and a coupling arm, and the optical power is input from the input arm of the input end cone through the The coupling zone is redistributed after coupling and output from the output end cone. A part of the optical power is output from the through arm and the other part is output from the coupling arm. The coupling zone includes two optical fibers, and the cladding parts of the two optical fibers are mutually connected. Close, when pulling the taper, the two optical fibers are pulled in opposite directions but cannot move relative to each other. The two optical fibers are processed by a fusion taper device.
At present, the method of making FBT WDM in industry is to use a flame to heat and melt the fiber at a single point and then stretch it. The defect is that the heating area is too short, resulting in a short stretchable length (corresponding to the coupling length), and the fiber diameter is not small enough, so This limits the minimum channel spacing that this type of wavelength division multiplexer can achieve.
FBT WDM, also known as Fused Biconic Taper WDM and FBT WDM Splitter, along with LAN WDM Splitter, Filter WDM splitter, dense WDM splitter and coarse WDM splitter, are the most commonly used WDM device in construction of PON.
Further, the melting taper device is formed by two insulation bricks made of aluminum oxide fiber insulation material to form a cavity, and the high temperature heat source is provided by an electric heating wire made of molybdenum disilicide material, and the heating wire is located In the heating tank, the heating temperature is adjusted by adjusting the voltage at both ends of the electrodes connected to it, the optical fiber passes over the heating wire, and the taper speed is adjusted by changing the rotation speed of the programmable stepping motor driver.
Further, the two optical fibers are fused and tapered in the fusion tapering device, one of which is used as the input power of the input arm, and the other is used as the coupling arm fiber. After the tapering length reaches a certain distance, the two fibers are coupled, and the optical power is Continuously couple into the coupling arm fiber, continue to taper, and the optical power is repeatedly and alternately coupled in the two fibers.
FBT WDM, Fused Biconic Taper WDM, FBT WDM Splitter
Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com